Q: How to Fix Oil Leaking from Your Stand Mixer?
A: Run the mixer to redistribute grease, clean excess oil, and replace old grease or seals if needed to stop leaks and restore normal operation.
Why Is Oil Leaking from Your Stand Mixer?
If you notice oil leaking from your stand mixer, don’t panic. This is a common issue and usually not a sign of serious damage. In most cases, it comes from the grease inside the gearbox separating over time.
Here are the main reasons why it happens:
- Grease separation
Inside the mixer, gears are coated with food-grade grease. When the machine sits unused for a long time, the oil can separate from the grease and leak out. - Lack of regular use
Mixers that are not used often are more likely to leak. Running the machine helps keep the grease evenly distributed. - High temperature or storage conditions
Heat can cause the grease to break down faster, leading to oil leakage. - Aging components
Over time, seals and internal parts can wear out, making it easier for oil to escape. - Overuse or heavy workload
Long mixing sessions or heavy dough can increase internal heat and pressure, which may push oil out.
Simple takeaway:
Most oil leaks are caused by separated grease, not a broken mixer—and they can usually be fixed with simple maintenance.
Step-by-Step: Fixing a Persistent Oil Leak
If your stand mixer keeps leaking oil, a deeper fix may be needed. Follow these steps to restore proper performance and prevent further leakage.
Step 1: Unplug and Open the Mixer Head
Always start with safety. Unplug the mixer before doing anything.
Open the mixer head to access the internal gearbox. This is where the grease is stored and where most leaks begin.
Step 2: Remove Old Grease
Over time, grease can break down and separate into oil.
Carefully remove the old grease from the gearbox. Clean out any liquid oil and degraded lubricant to prepare for fresh grease.
Step 3: Apply New Food-Grade Grease
Use high-quality, food-grade grease designed for kitchen equipment.
Repack the gears evenly. Make sure all moving parts are properly coated, but avoid overfilling.
Step 4: Check and Replace Seals
Inspect seals and gaskets around the gearbox.
If they are worn, cracked, or loose, replace them. Damaged seals are a common cause of ongoing leaks.
Step 5: Reassemble and Test
Put the mixer back together carefully.
Run the mixer at a low speed first, then increase gradually. Check for any signs of leaking and confirm smooth operation.
Need Help Fixing Your Mixer?
Not sure how to repair your stand mixer or prefer expert support? Contact us today for professional advice and reliable solutions. Our team can guide you through maintenance, parts replacement, or recommend the right equipment to keep your production running smoothly.
English 
Arabic 
German 
Spanish 
French 
Italian 
Japanese 
Korean 
Portuguese 
Russian